Lift & Hoist Cables - LIFT-2S
These cables are used as a control or feeder cables in lifts and hoists. Ideally installed onto the pendant manual control unit.
The two steel wire reinforcements act as stress or torsion protection to the cable of the control unit of the system.
|Fine strands bare copper conductor IEC 60228 cl.5
|PVC insulation textile banding
|Lateral suspension wire
|Sheathed stranded steel wires
|White cores with black printed numbering, green-yellow earth core in the outer layer
|PVC, black colour
|Ozone resistance, oil resistance, moisture resistance, chemical resistance, U.V resistance, weather resistance & flame retardant (IEC 60332-1)
|Flexing: -5°C to +40°C Fixed installation: -40°C to +70°C
|Max. conductor range
|Under load: +70°C Circuit conditions: +150°C
|Min. bending radius
|Approx. 20 x cable diameter